Riding a bike is fun, but it is even more fun when the bike has just been tightened up: the brakes and shifters work like a Swiss watch and all the different components are in perfect harmony and it almost feels like the bike rides itself... "Be One with Your BIKE"
Tune-up Services
Pre Race/Ride Safety Inspection for (Road, Tri, Gravel, MTB, and Hybrid Bikes) - $45
(30minutes estimate work time)
Includes the following:
- -Inspection of Frame and Fork
- -Inspection of Wheels and Tires
- -Brake System Inspection
- -Drive Train Inspection
- -Inspect and Adjustment of all Bolts to Nm Specs
Standard Bicycle Tune-up (Road, Tri, Gravel, MTB, and Hybrid Bikes) - $65
(1:30hr estimate work time)
Includes the following:
- Brake Adjustment - Mechanical (Non-Disc)
- Front and Rear Shifter and Derailleur Adjustment
- Front and rear Lube Cable and Housing for Brakes and Derailleurs - Mechanical
- Tighten all bolts to proper torque spec
- Clean and Lubricate the Chain
- Inflate tires to proper pressure
- Security Check for All Accessories, i.e. Water Bottle Cages, Light, Computer, etc.
- Replace bar end plugs, if missing
- Frame Wipe
- NOTE: If you have Electronic Shifting and/or Disc Brakes - Please choose the Advanced, Elite, or Pro Tune.
Advanced Bicycle Tune-up (Road, Tri, Gravel, MTB, and Hybrid Bikes) - $85
(2:15hr estimate work time)
Includes the following:
- Includes the Standard Tune up
- Plus the following:
- Brake Adjustment - Hydraulic or Mechanical Disc
- NOTE: If bleed required there will be additional charges for the bleed
- Drivetrain Clean and Lube
- Remove Crankset, Clean, Lube, and Reinstall
Elite Bicycle Tune-up (Road, Tri, Gravel, MTB, and Hybrid Bikes) - $135
(2:45hr estimate work time)
Includes the following:
- Includes Standard Tune up and Advanced Tune up
- Plus the following:
- Front and Rear Spot Wheel True Tension
- Bottom Bracket Inspection and Torqued to Correct Spec
- Headset Inspection and Bolt Torqued to Correct Spec
- *Installing new Cables and Housing will require an additional Charge - See Installs
Elite Bicycle Tune-up (E-Bike Bikes) - $148
3hr estimate work time)
Includes the following:
- Includes Standard Tune up and Advanced Tune up + the additional work for E-Bike
- Plus the following:
- Front and Rear Spot Wheel True Tension
- Bottom Bracket Inspection and Torqued to Correct Spec
- Headset Inspection and Bolt Torqued to Correct Spec
- *Installing new Cables and Housing will require an additional Charge - See Installs
- Firmware Update on Motor/Drive (unless proprietary to to brand where only authorized dealers are allowed to do so)
PRO Bicycle Tune-up (Road, Tri, Gravel, MTB, and Hybrid Bikes) - $195
(3:15hr estimate work time)
Includes the following:
- Includes Standard Tune, Advanced Tune, & Elite Tune + the following:
- Brake Adjustment - Mechanical or Hydraulic
- Precision Wheel True Tension of both Wheels plus Dish and Lateral True
- Front and rear Lube for Cable Housing to include Brakes and Shifting
- Tighten all bolts to proper torque specs
- Fully clean and lubricate Chain
- Inflate tires to proper pressure
- Check all accessories for proper torque specs
- Drivetrain Complete Clean
- Bike Complete Clean to include Frame, Fork, Wheels, Shifters/Brake Levers, Brake Calipers, etc
- *Installing new Cables and Housing will require an additional Charge - See Installs
Bicycle Hydraulic Brake Bleed/per each Caliper - $45
(40 minutes estimate work time)
Bicycle Hydraulic Brake (Remove Air and Top Off Fluid) Bleed/per each Caliper - $25
(30 minutes estimate work time)
Bicycle Tune-up Adjust Mechanical Caliper or Mechanical Disc BrakeOnly - $20
(20 minutes estimate work time)
Includes the following:
Adjust Mechanical Caliper or Mechanical Disc Brakes
Bicycle Tune-up Adjust Hydraulic Disc Brakes (Rotors and Pads) Only - $30
(30 minutes estimate work time)
Includes the following:
Adjustment of Hydraulic Disc Brakes (rotors and pads)
Bicycle Tune-up Electronic Shifting Adjustment/Update Only - $30
(30 minutes estimate work time)
Includes the following:
Electronic Shifting Adjustment including Firmware Updates
Bicycle Tune-up Clean and Lubricant Bicycle Chain, Cassette, and Derailleurs (w/o removal) - $25
Includes the following: (25 minutes estimate work time)
- Clean and Lubricant Bicycle Chain, Cassette, and Derailleurs (w/o removal)
Bicycle Tune-up Shifter Cables and Housing ADD ON to a Bike Tune Up Only - $30
(45 minutes estimate work time)
Includes the following:
Install and Lube New Shifter Cables & Housing w/Bike Tune-up - Mechanical Internal Integrated or Exterior - Add on to a Bike Tune Up Only
Bicycle Tune-up Brake Cables and Housing - ADD ON to a Bike Tune Up Only - $30
(45 minutes estimate work time)
Includes the following:
Install and Lube New Brake Cables & Housing w/Bike Tune-up - Mechanical Internal Integrated or Exterior - Add on to a Bike Tune up Only
Individual Rear or Front Derailleur standard adjustment/per derailleur available - $15/per Derailleur
Installs
Install and Lube New Brake Cables and Housing - Mechanical Internal Integrated or Exterior (Labor Only) - $50
Includes the following: (1hr estimate work time)
- Install and lubricate New Brake Cables and Housing - Mechanical Internal Integrated or Exterior
- Note: *Cost of Cables and Housing plus any additional supplies needed will be at an additional cost
Install and Lube New Shifter Cables and Housing - Mechanical Internal Integrated or Exterior (Labor Only) - $50
Includes the following: (1hr estimate work time)
- Install and lubricate New Shifter Cables and Housing - Mechanical Internal Integrated or Exterior
- Note: *Cost of Cables and Housing plus any additional supplies needed will be at an additional cost.
Install and Lube Both New Brake and Shifter Cables & Housing w/Bike Tune-up - Mechanical Internal Integrated or Exterior (Labor Only) - $60
Includes the following: (1hr estimate work time)
- Install and lubricate New Brake ad Shifter Cables & Housing - Mechanical Internal Integrated or Exterior
- Note: *Cost of Cables and Housing plus any additional supplies needed will be at an additional cost.
Install Bar Tape (Purchased at OZ® Bike Fit) - $10
Includes the following: (30 minutes estimate work time)
- Labor for installation of handle bar tape
- Note: *Bar Tape purchase will be in addition to labor
Install Bar Tape (Purchased from Source outside of OZ® Bike Fit) - $20
Includes the following: (30 minutes estimate work time)
- Install Bar Tape (Purchased from Source outside of OZ® Bike Fit)
Install / Rewrap Handlebar tape w/current Tape - $15
Includes the following: (20 minutes estimate work time)
- Install/Re-wrap Handlebars w/current Bar Tape
Install New Stem/Headset Components - $35
Includes the following: (30 minutes estimate work time)
- Installation of New Stem and/or Headset Components
- *New Headset and/or any additional supplies needed or used for install will be at an additional charge
- **No charge for new stems installed during a bike fitting session
Install / Seat Post Cut down - $15
Includes the following: (15 minutes estimate work time)
- Intstall - Seat Post Cut Down
Install New Handlebars (Purchased at OZ® Bike Fit) and route/re-route wires or cables/housing - $25
Includes the following: (1hr estimate work time)
- Install New Handlebars (Purchased from OZ® Bike Fit) and route/re-route wires/cables
- *Note: New cables/housing, wires and/or new bar tape needed will be in addition to the install labor
Install New Handlebars (Purchased from a source outside of OZ® Bike Fit) and route/re-route wires or cables/housing - $35
Includes the following: (1hr estimate work time)
- Install New Handlebars and route/re-route wires/cables
- *Note: New cables/housing, wires and/or new bar tape needed will be in addition to the install labor
Install and/or reroute Di2 Handlebar wires purchased at OZ® Bike Fit (Labor) - $20
Includes the following: (1hr estimate work time)
- Install and/or reroute Di2 Handlebar wires purchased at OZ Bike Fit
Install Crankset (purchased from OZ® Bike Fit) - $25
Includes the following: (35 minutes estimate work time)
- Standard Crankset Installation - Any exotic type crankset may be at an additional charge
Install Crankset (purchased from source outside of OZ® Bike Fit) - $35
Includes the following: (35 minutes estimate work time)
- Standard Crankset Installation - Any exotic type crankset may be at an additional charge
Install - Cassette Swap/Install (purchased OZ® Bike Fit) - $10
Includes the following: (15 minutes estimate work time)
Install - Cassette Swap/Install (purchased from source outside of OZ® Bike Fit) - $15
Includes the following: (15 minutes estimate work time)
Install New Bike Chain (purchased from OZ® Bike Fit) - $10
Includes the following: (20 minutes estimate work time)
- Removal of old chain and installation of new chain
Install New Bike Chain (purchased from source outside of OZ® Bike Fit) - $20
Includes the following: (20 minutes estimate work time)
- Removal of old chain and installation of new chain
Install New Tire and/or Tube - Tubed Clinchers (Tire and/tube purchased from OZ® Bike Fit) - $7.50
Includes the following: (10 minutes estimate work time)
- Install New Tire and/or Tube (Tubed Clinchers)
Install New Tire and/or Tube - Tubed Clinchers (purchased from source outside of OZ® Bike Fit) - $10
Includes the following: (10 minutes estimate work time)
- Install New Tire and/or Tube (Tubed Clinchers)
Install - Tubeless Tire Set-up (New or Remount)/per wheel - $30
Includes the following: (20 minutes estimate work time)
- Install - Tubeless Tire Set-up (New or Remount)
- Additional $10/per wheel w/o rim tape
Bike Assembly
Bicycle Assembly Super Bike Build - All Internal Routing of Shift Cables (Mechanical or Electronic Shifting), and Mechanical or Hydraulic Brakes - $450 + if applicable - any additional cost as prescribed below.
(8-12 hrs estimate work time)
Prior to setting up this service - please call me at 479-619-6775 to discuss this service.
Description:
- Super Bike Assembly - custom build-up of frameset, parts, components, and accessories - fully internal routing of Shift Cables (Electronic/Mechanical Shifting) and Hydraulic/Mechanical Brakes. If additional parts/components are needed in the build and not prescribed upfront, additional Charges may apply up to $60/hour for labor + cost of part/accessory.
- *Note: Pricing above is for labor only and does not include any additional parts, components, or accessories required or requested in the build. Those will be added as an additional cost.
- There will also be a standard Charge of $10 for shop supplies used during the build and $5 for each install of additional component or accessory outside of standard assembly.
- *Note: Additional $150 will be added to assembly for bike w/parts, components, and accessories purchased outside of OZ Bike Fit if the additional parts/components are not presented with the build upfront.
- **NOTE: You will drop off your bike within an agreed upon prescribed time/appointment, leave it with me, and I will contact you when complete.
- ***Note: Disassembly of a bike to swap components to a new bike will be an additional $45.
- I realize this seems like a lot, but a super bike requires a lot of time, patiences, and detail. I take bikes like this extremely serious as they require and deserve that amount of attention.
- Unexpected issues outside the norm may be charge at $60/hr of by the pre-listed charge for that service.
Bicycle Assembly Custom Build for Road, Tri, Gravel, and Hybrid Bikes - $250
(4hr estimate work time)
Includes the following:
- Assemble bicycle with a custom build-up of frameset, parts, components, and accessories - externally routed or minimal internal routing
- *Note: Additional $100 added to assembly for bikes w/parts, components, and accessories mostly purchased outside of OZ® Bike Fit
Bicycle Assembly Frameset and Build Kit for Road, Tri, Gravel, and Hybrid Bikes - $175
(2:30 hr estimate work time)
Includes the following:
- Assemble bike with frameset and full build kit to include groupset
- *Note: Additional $100 added to assembly for bikes w/parts, components, and accessories mostly purchased outside of OZ® BIke Fit
Bicycle Assembly New Bike from Box Partially Pre-Built for E-Bikes - $175
(2 hr estimate work time)
Includes the following:
- Assemble bike with frameset, build kit, parts, and components within the box package
- If the bike build requires additional parts not included in the box, additional charges may apply
- *Note: Doesn't include any additional accessories added - those installations will be at additional charge
Bicycle Assembly New Bike from Box Partially Pre-Built for Road, Tri, Gravel, and Hybrid Bikes - $150
(1:30 hr estimate work time)
Includes the following:
- Assemble bike with frameset, build kit, parts, and components within the box package
- If the bike build requires additional parts not included in the box, additional charges may apply
- *Note: Doesn't include any additional accessories added - those installations will be at additional charge
Bicycle Disassembly Service - $45
(45 minutes estimate work time)
Includes the following:
- Bike Disassembly down to the frame to ready it for shipping, bike swap, or as needed
Bicycle Packaging and Boxing for Shipment: Frameset - $25
(20 minutes estimate work time)
Includes the following:
- Bike Disassembly down to the frame to ready it for shipping or as needed
Misc
Services not previously set upfront may be available on an hourly basis at - $65/hour
Additional Labor for Removal and Cleaning of Corroded/Rusted Parts/Bolts/Components/etc - $30
Includes the following: (1:15hr estimate work time)
- Additional Labor require to remove and clean corroded/rusted Parts/Bolts/Components/etc
Additional Services are being added and are Available
- Please text or email me for a quote on the time(labor cost), supplies cost, and products (cost) and additional services required
- kevin@whaley.biz or 479-619-6775
*Note: Pricing above is for labor only and does not include any additional or replacement parts, components, accessories, or additional labor required within the prescribed Maintenance Work. Those will be added as an additional cost. There will also be a standard Charge of $10 for shop supplies used during the Tune-ups and Standard Charge of $5 for shop supplies used in Installations.
**NOTE: You can also drop off your bike within the prescribed time of the appointment, leave it with me, and I will contact you when complete.
OZ BIKE FIT takes APPOINTMENTS on a first come basis. Each bike is important to me and we really balance where a bike lands in the completion line to meet a customers timeline. To SCHEDULE an APPOINTMENT just Click this Link or you can text me at 479-619-6775 to set up. For quick EMERGENCY fixes like tubes, etc just bring it on and I will work to get you going ASAP as labor availability and time allows!